1.       IMPORTANT: DO NOT REMOVE CLEAR PLASTIC FRONT COVER YET.

2.       Using a mild soap, clean the area where the emblem will be attached, rinse with water and dry the area thoroughly with a soft lint-free cloth.

3.       Use a gentle tack tape to temporarily apply a straight edge (such as a ruler) to the application area. This straight edge will serve as a baseline directly above which to apply the Emblem level and straight.

4.       Peel the white paper off the back of the emblem and line up the bottom of the letters to the top of the straight edge. * (NOTE: Make absolute certain that the letters are straight BEFORE FINAL APPLICATION.) Gently press the letters in place. If needed letters can be carefully removed and repositioned before final lock down.

5.       When all emblem letters are evenly applied, peel the clear plastic off of the front cover, re-check the letter alignment, and finally press the letters firmly to lock each one in place.